Futon Frame Maintenance and Common Replacement Parts and Hardware

A little preventative maintenance of your futon frame can greatly increase how long it lasts. We recommend checking the bolts on your futon frame every month or two, depending on how often it's used. If they are loose, gently tighten them, but be careful not to over tighten them. If you have a wooden frame, you can rub a bar of Ivory soap in the arm tracks every now and then, to keep things operating smoothly.

Most of the damage that we see is from forcing the frame to operate, when it's stuck. If you are converting your frame from a bed to a sofa, or from a sofa to a bed, and it does not easily convert, stop what you are doing, and remove the mattress, and carefully examine why it's not moving easily. Usually if you try to convert the frame and you pull on one side more than the other, something will jam, and if forced, you may break something.

Normally a guest will try to make their bed in the morning, and not knowing how to do it, they may break your frame. We suggest telling your guests to leave the futon as a bed, and you'll take care of changing it from a bed to a sofa for them.

Some parts wear out, and some of the plastic parts can dry out over the years. If the bolts are not tightened, a part can move around in a way that it's not recommended to, and that can cause it to break. People ask us why they do not make some of the parts in futon frames out of metal so they're never break. The reason is, if they were metal, and something jammed up, and was forced, the seat, or back, or an arm would crack, and that would be a more costly repair.

Here's a list of some of the more common futon frame hardware and parts. This is by no means a complete listing of all the parts, but it includes most of the common parts. Some items are called more than one name, so we list them twice. Futon store that has been around a long time, might even have obsoleste parts that you might need.

If you need a part that you can not find anywhere, consult a good futon store who's willing to help you, and give them a description and a couple of pictures showing what you need and see if they are willing to help you. They may need to know the name of the manufacturer of the frame because there are many frames that look the same, but the size of the bolts or seat decks and other items will all be slightly different.

Futon Bolts
Standard Futon Hinges
Click Click Hinges
Triple Click Hinges
Futon Mattress Storage Bags
Oblong Rollers
Carriage Blocks
Round Futon Rollers
Double Futon Rollers
Nylon Roller Inserts
Futon Barrel Nuts, Nuts, and Cross Dowels
Larger Futon Barrel Nuts
Futon Seat Stoppers
Futon Storage Bags
Allen Wrenches
Larger Allen Wrenches
Plastic Leg Caps
1/2 "Futon Hardware Sets
5/8 "Futon Hardware Sets
Angle Support Brackets
Decorative Bolt Covers or Plugs
Clevis Pins and Assemblies
Various Plastic Rollers, Glides and Carriage Blocks
Stretcher Support Rails
Futon Seat Decks
Futon Back Decks
Futon Arms
Cotter Pins
Washers and Clips
Futon Slats and Supports

Posted in general | Comments Off on Futon Frame Maintenance and Common Replacement Parts and Hardware

Introduction to Silk Test Architecture

Normal use of an application consists of a person manipulating a keyboard and mouse to initiate application operations. The person is said to be interacting with the GUI (Graphical User Interface). During Silk Test testing, Silk Test interacts with the GUI to submit operations to the application automatically.

Thus Silk Test can simulate the actions of a person who is exercising all the capabilities of an application and verifying the results of each operation. The simulated user (Silk test) is said to be driving the application. The application under test reacts to the simulated user exactly as it would react to a human rest. Silk Test consists of two distinct software components that execute in separate processes:

The Silk Test host software

The 4Test Agent software

Silk Test host software

The Silk Test host software is the program you use to develop, edit, compile, run and debug your 4Test scripts and test plans. This manual refers to the system that runs this program as the host machine or the Silk Test machine.

The Agent

The 4Test Agent is the software process that translates the commands in your 4Test scripts into GUI-specific commands. In order words, it is the Agent that actually drives and monitors the application you are testing. One Agent can run locally on the host machine. In a networked environment, any number of Agents can run on remote machines. This manual refers to the systems that run remote Agents as target machines. This manual refers to the systems that run remote Agents as target machines. In a client/server environment, Silk Test drives the client application by means of an Agent process running on each application’s machine. The application then drives the server just as it always does. Silk Test is also capable of driving the GUI belonging to a server or of directly driving a server database by running scripts that submit SQL statements to the database. These methods o directly manipulating the server application are intended to support testing in which the client application drives the server.

Posted in general | Comments Off on Introduction to Silk Test Architecture

Double Towel Racks – The Easy Way To Increase Space

Bathrooms almost always pose a storage challenge. They often have minimal space to do all the jobs we need to do in there and to store everything we use while we're in there.

When a bathroom is shared by a couple of people, or even an entire family, unique storage challenges come up, and they require unique solutions. When, say, four people use the same room for bathing, an obvious problem is: where do you put all the towels? Bathroom hardware manufacturers came up with a better solution: double towel racks.

A traditional single towel rack provides sufficient space to dry one towel. If you've got four people using four towels each day, and you have a typical bathroom, you'll need a wall covered with towel rods to provide enough drying space.

Double towel racks provide an innovation solution to this all-too-common bathroom storage problem. You'll find double towel racks come in traditional finishes like polished chrome and polished and antique brass, and popular finishes like brushed nickel and oil-rubbed bronze. You can find economic versions of double towel racks in unfinished wood and ceramic-and-plastic. Regardless of the amount the wall space you have available to install this hardware, you'll find one to fit your space; They come in the range of standard sizes.

If your bathroom is short on storage, you'll usually be open to considering any new space-saving solutions. You can find bathroom suites with a double towel racks installed below. Imagine-in the space where you could normally dry a towel or two, you can double your hanging space, and have room to store a few fresh folded towels and other bathroom essentials, too.

Double towel racks are an excellent solution when you've got lots of damp towels to handle, but other solutions do exist:

• Install a row of pegs or hooks along the wall of the bathroom.
• Install one or more multi-prong hooks on the back of the bathroom door.
• Buy a shower curtain rod with a towel rack incorporated in its design.
• When you purchase shower doors, look for ones where the handles double as towel bars.
• Install suction-cup hooks inside the tub surround.
• Place a swing-arm towel bar to the wall next to your tub or shower. This way, the towel bars extend into the room; They are not limited to hanging against a wall.
• Hang a hook over the bathroom door, linen closet door, or the door of the water closet. These over-door hooks come in single, double, and multiple hook versions in colors and finishes that either stand out or blend in.
• Repurpose an old-style coat rack and use it to hang towels in the bathroom. It takes up only a single square foot of precious floor space.
• If you want to add furniture to your bathroom, look for a hall tree, which is usually reserved for use in the foyer or a mudroom. They come in many styles and finishes, equipped with hooks, mirrors, storage benches, and shelves.
• If you've fortified enough to have a sizable linen closet in your bathroom, visit the closet organization section of your home improvement store. These stores have trained personnel who can help you look at the space you have and redesign it to suit your needs.

Installing a couple of double towel racks can provide a simple way to add storage space to your bathroom. But investigate all the possible storage options for your unique bathroom design challenges. You're not limited to one solution-think creatively and combine them to make a bathroom that works for you.

Posted in general | Comments Off on Double Towel Racks – The Easy Way To Increase Space

8 Criteria to Choose the Best Antivirus Program For Your Needs

There is no best antivirus program in general. You can make the best choice of your antivirus software depending on your goals, your needs and your environment. In order to choose your best antivirus software you should look at vendor information, independent antivirus certifying agencies reviews, as well as other sources. Here are the essential criteria for the right choice.

1. Compatibility
Antivirus program has to be compatible with your PC configuration. Your PC must meet hardware and software requirements of antivirus solution.

2. Range of Protection
Antivirus software should protect your PC from as many threats and on as many viruses as it can: viruses, worms, trojans, spyware, keyloggers, adware, rootkits, password stealers, phishing attacks, spam and others.

3. Effectiveness
Antivirus protection delivery by antivirus program should be effective and efficient. You may find and compare test results released by independent antivirus certifying agencies: Virus Bulletin, AV Comparatives, ISCA Labs, Westcoast Labs and others. If some antivirus solution was scored by these agencies high and consistently near the top, then you really can not go wrong with this top rated antivirus software.

4. Easy Installation
Good antivirus program has a prompt and easy installation. Interface should be clean, easy, and intuitive to use.

5. Easy to Use
Most users want to "install and forget" their antivirus software. So the best antivirus solution should have default configurations acceptable for most users. And at the same time good antivirus program can be easily configured and tweaked by advanced users.

6. Features
The best antivirus programs have the large features set that may include:
– list of compatible versions of Operational systems and platforms,
– amount of used system resources,
– using of proactive protection without false positives and with effective utilizing of system resources,
– availability of laptop battery saving mode,
– bootable rescue disk,
– silent gamer mode, and other available options.

A comprehensive features set adds strength to antivirus solution.

7. Update
The best security solutions have Automatic Update option and automatically perform updates every hour or "as needed updates" to keep virus definitions and program code up to date.

8. Support
The best security programs have a comprehensive online and offline technical support. The program vendor should provide online knowledge base, FAQs, tutorials, user forums. The best sellers provide 24/7 support so you can ask your questions by phone, email or chat at any moment.

The best for your needs antivirus program delivers you the best security and usability with a minimal outlay of your time, money, or your PC system resources.

Posted in general | Comments Off on 8 Criteria to Choose the Best Antivirus Program For Your Needs

How to Resolve “Memory Card Error” From Canon IXUS 130

Canon IXUS 130 is a sophisticated digital camera that has a resolution of 14.1 megapixels. The camera is inbuilt with almost all advanced features, including fully wide-angle 4x zoom lens and motion blur technology. The IXUS camera is compatible with SDHC (Secure Digital High Capacity) and SDXC (Secure Digital Extreme Capacity) cards, with storage capacity as high as 2TB.

Since the storage memory of the cards is huge, data loss from these cards is simultaneously huge. One of the main reasons for data loss from cards is corruption of these cards. In most cases, you receive an error message after your card gets corrupted. However, an updated backup allows you to overcome card corruption. It allows you to restore data. But in case of unavailability of backup, you can use recovery software to recover data from a corrupted card.

As a practical case, you view the below error message on Canon IXUS 130 while attempting to view some previously stored photos on your SDHC card:

“Memory Card Error”

Every single photo saved in the memory card becomes inaccessible after the above error message appears. In addition, no more photo can be saved on card. In short, the card can not be read or written upon.

Cause:

The above error message that makes all the photos inaccessible is primarily caused due to corruption of card. Few reasons that are accountable for the above error message are virus infection, interrupted read/write operation, and human errors.

Resolution:

The resolution for the above error message is formatting of memory card in the camera itself. The process deletes all the previously saved data and allows you to save new data. While formatting proves a good resolution for users who do not require the old data, it becomes fatal for users, like photographers, detective agents, etc, who save critical data in their memory card. However, recovering formatted data now-a-days is an easy process. To do so, you need to use an advanced third-party Photo Recovery Software. A Image Recovery tool is readily available on the Internet by just one single click.

Posted in general | Comments Off on How to Resolve “Memory Card Error” From Canon IXUS 130

The 4 Elements That Makes Up A Personal Computer System

There are 4 elements that make up a personal computer system: the user, software, hardware and the electricity all working together for the whole system. Each of these elements is essential to the system itself.

The user is the person's who perform the task using the computer system. The nature of the task depends upon the application program or software that is needed to perform the task. The software that the user used requires certain hardware components to function properly.

The hardwares of the personal computer system are made up of its equipment that are usually connected (the computer, monitor, printer and so on). It is defined as hardwares because you can physically touch these components. The programs are called softwares since their function can only be used when the computer is turn ON. Software is a set of coded instructions that the computer uses in order to carry out the user's tasks.

The user can only use the computer when it is turned ON. Without any electrical power to run through the personal computer system, it will not function. The ability of the personal computer system to control its components is through a series of on / off signals.

Here is how it works, when a user tries to type a document or a letter using his / her personal computer. The first thing the user do is to turn ON the power for the computer. Choosing a Word Processor software in order to write the document. The user uses the hardware such as the keyboard to write the content of the document; The typed document is then displayed onto the monitor screen. After the user finished writing his / her document. The user will use the software to instruct the printer to print the document. The software works together with the hardware components (the keyboard, monitor and printer) to accomplish the task that the user requested.

All of the four elements: the electrical power, hardware, software and the user work together to make up a personal computer system.

Posted in general | Comments Off on The 4 Elements That Makes Up A Personal Computer System

Introduction to Silk Test Architecture

Normal use of an application consists of a person manipulating a keyboard and mouse to initiate application operations. The person is said to be interacting with the GUI (Graphical User Interface). During Silk Test testing, Silk Test interacts with the GUI to submit operations to the application automatically.

Thus Silk Test can simulate the actions of a person who is exercising all the capabilities of an application and verifying the results of each operation. The simulated user (Silk test) is said to be driving the application. The application under test reacts to the simulated user exactly as it would react to a human rest. Silk Test consists of two distinct software components that execute in separate processes:

The Silk Test host software

The 4Test Agent software

Silk Test host software

The Silk Test host software is the program you use to develop, edit, compile, run and debug your 4Test scripts and test plans. This manual refers to the system that runs this program as the host machine or the Silk Test machine.

The Agent

The 4Test Agent is the software process that translates the commands in your 4Test scripts into GUI-specific commands. In order words, it is the Agent that actually drives and monitors the application you are testing. One Agent can run locally on the host machine. In a networked environment, any number of Agents can run on remote machines. This manual refers to the systems that run remote Agents as target machines. This manual refers to the systems that run remote Agents as target machines. In a client/server environment, Silk Test drives the client application by means of an Agent process running on each application’s machine. The application then drives the server just as it always does. Silk Test is also capable of driving the GUI belonging to a server or of directly driving a server database by running scripts that submit SQL statements to the database. These methods o directly manipulating the server application are intended to support testing in which the client application drives the server.

Posted in general | Comments Off on Introduction to Silk Test Architecture

Recommended Software for Arena Management

When there is a little over a month left to enter the data for a thousand plus cattle penning teams into a fickle spread sheet software program that was built by good intentioned volunteers; the last thing anyone should be doing is looking for replacement software. However, as any event/entry secretary or producer knows this is sometimes the lifeline that is needed to get the job done.

The preparation of all of the necessary data combined with balancing a three-quarter of a million dollar show in the six weeks prior to its start should have been enough to do. Throwing in a new piece of software to learn and master would be considered ludicrous to say the least. The producers deemed it to be a necessity in view of the history of inconsistencies in the program currently in use.

With a three-year old recommendation in hand and very little back ground checking, Arena Management Software became the chosen lifeline. The software was purchased, loaded onto the computers, played with for a day or so and then our team went to work. The KCI support group was there, day and night, to help with the learning curve and any snags that presented themselves. Our team quickly realized that the new user-friendly software program we had taken a chance on was going to be our ongoing choice for future events. The show was a success. The producers and contestants were happy. All was good in our world!

There have been a lot of years pass by since those short six weeks when our group became acquainted with the Arena Management Software. The program still provides a user-friendly format that has the talent to produce minimal data to realms of reports. From rodeo to cattle penning events the product continues to amaze our team with its ability to perform in and out of the arena.

Posted in general | Comments Off on Recommended Software for Arena Management

Strengths and Weaknesses of Waterfall Approach for Software Development

One of the most famous and widely used approaches for software development is the waterfall model. Waterfall approach is an old technique that has been in use for quite some time, but in modern times agile approach is gaining prominence.

Waterfall approach, as is evident from the name, refers to a systematic approach where one step comes after the other. It cannot go the other way round. The process works like the waterfall effect that flows in one direction, which is from up to down.

In this process the life cycle of the development process is predetermined. All the steps are defined before the start of the project. The approach is predictive, where the team is well aware of the order of each step and therefore works accordingly. It starts from the requirement analysis, the design phase and then proceeds on to the implementation, testing and the maintenance phases.

The waterfall approach can be quite beneficial for those who are quite clear on their requirements. A planned approach works for them because they want fixed processes and budget. Where fixed processes are beneficial, at the same time they can be inconvenient at times. In cases where the client is not clear on the requirements and finds in the middle of the project that he/she wants to change course, this approach can prove to be quite problematic.

Another point of the waterfall approach is that the requirement analysis and design of architectural structure can consume a lot of time. Extensive research is done initially as the next phases depend completely on the planning strategy. However, the good thing is that everything is thoroughly worked out and each aspect is studied beforehand. The developers in such cases know what is expected of them.

A waterfall approach works in a systematic order, with one step following the other and the testing phase comes in the end. If there are any big problems encountered in the testing phase, it means a long process to make the amends. The process can consume extra time and money.

We cannot conclude that one approach is better than the other, as every method would have its own strengths and weaknesses. The determination of success for each method depends on how it is being used and whether the approach suits the scope of work being undertaken. While one approach may be suitable for a particular project, it might become totally useless under different circumstances. For example, some believe that agile methods are not well suited for offshore development, as they require a closer contact and communication that is not possible in an offshore project.

Posted in general | Comments Off on Strengths and Weaknesses of Waterfall Approach for Software Development

Advantages and Disadvantages of Biometric Time and Attendance Software

First of all let me ask you what you understand by time and attendance software? Have you ever been asked to log in as soon as you enter office and the main gate of the office has a Biometric machine that takes in your finger prints and allows you to enter the office premise? Yes, these are the time and attendance software being installed in a company.

Biometrics consists of methods for uniquely identifying a person (human being) by his/her physical or behavioral traits. There are many biometric software available in market for such purpose and their use is widely known. One such use is Biometric time and attendance management software.

Those days are gone when we had to punch in cards or sign into a register to tell the other person that we are present. Just as paper checking has been changed from manual to computerized, identifying a person and letting him in your office has been changed from manual to biometrics.

There are many benefits of having such methodology in your office. Such as:

• Accurate timing: When a person looks at his watch and enters the time there is a slight chance that he may see the wrong timing and write. Whereas with biometric time and attendance software there is no possibility of such mistake. The user does not need to see or check the time, it automatically gets logged in.

• Less error: There is no scope of human error here.

• Profit to company: If it’s accurate and correct the company will definitely gain from it.

As everything has a good and bad side this too has its disadvantages, such as:

• Extra cost to company: Biometric software and machine cost a lot more, so installing such software need a good investment money wise.

• Extra management: Remember when every employee is logging his own timing when he comes or leaves; there is no extra management here. But, if you are putting a machine there has to be taken some care of it.

Biometrics time and management software is really helpful when creating payrolls for employees. Once a definite timing has been registered you don’t need to think twice before creating the employees pay.

Many homes are also using such kind of software to have a safe and secure home. Biometric software is really helpful when you need security in your home as well as in office. There are many companies all over the world providing such biometric time and attendance software. You just need to keep an eye on the technologies and websites that are providing you these.

Posted in general | Comments Off on Advantages and Disadvantages of Biometric Time and Attendance Software